Date 2005-11-01
Author: Gotall
Editor: Princess Ammie
Wow case by Gotall
Ok it's not time for the first article here on RBMods... this will be a Theme Remake.
I have a Sunbeam UV reactive acrylic case that is going to have a makeover, not to much just a bit.
There hasn't been that many made with this theme that I've seen, and this is my first try doing it.
First of all I want to thank RBMods for the case they provided for me to work on ... it's a Sunbeam uv miditower.
Please click on thumbnail for bigger picture
The case a Sunbeam UV miditower
Tip of the day!!
Sketch:
To get a nice sketch I needed to search google for good quality pics and I found some nice ones I think.
Transfering the sketch to the case:
There are many ways to do this; I took a way I think works best for me.
I just put the acrylic sides on top of the paper and followed the lines ... easy as it sounds it's kind of tricky. This is because the pins will dig down if you're pushing to hard and the pins have a way of doing their own thing and moveing where they're not suppose to be ...but I like this way and it works for me.
A Thought:
As usual don't panic and get into to much of a hurry with engraving. Take your time, get a nice chair to sit in, and if you like coffee get a lots of it ;)
OK let's get started.
Please click on thumbnail for bigger picture
The Top of the Case.
nice pic...
The "Horde Flag"
Please click on thumbnail for bigger picture
Please click on thumbnail for bigger picture
After Awhile of Engraving ...it's Starting to Take Shape.
Please click on thumbnail for bigger picture
Right Side of the Case... the Mobo Place... I Kind of Like the Big Taurens so That's What I Need..
Please click on thumbnail for bigger picture
You can See How the Lines are Made... Kind of Time Demanding but Still This is Just the Lines the Actual Detailwork Comes Later... ;)
Please click on thumbnail for bigger picture
Here After approximately 6 hours of Engraving You Can See the Detail Working its Way Into the Acrylics...
RSS
