We got a cool little gadget from Thermaltake here on our test bench today. They sent us their new water level and flow indicator.
This gadget is mounted in two 5.25 slots in the front of the case, and helps you to see the waterflow and the water level in your system.
It's the first time we have taken a look at something like this and this specific product can be included into the BigWater water system from Thermaltake also.
flow indicator(right side)
Dimension 58.9 x 35.88 x 26 mm
Weight 103 g
Main Body Pure Aluminum, Anodized
water level indicator(left side)
Dimension 82.97 x 82.97 x 60 mm
Weight 402 g
Material Pure Aluminum, Anodized
Mounting Plates
Dimension 148 x 86 x 140 mm
Material iron
Total Weight 600g
install Connector
Quick install Connector(1) For 6.4mm ID (1/4“) tubing
Quick install Connector(2) For 9.5mm ID (3/8”) tubing
Features:
Application: Can be applied to Thermaltake BigWater and other liquid cooling system
For 5.25” drive bay : the indicator can fit into two 5.25" drive bays in the case
Quick Install Connectors: The connection of the temperature probe is suitable for tubing of 6.4 to 9.5 mm to inner diameter.
Water level : Transparent window indicate the level of the water
Water flow : indicate the movement of the liquid
Mounting Plates : Stylish front plate is designed to attach the indicator within two 5.25" drive bays
The product:
Please click on thumbnails to get bigger pictures
The box is not much bigger than the unit itself, and on the front you have a nice picture of the unit in action. You can either run this with normal
battery water and include some waterdye if you want to so you get a cool look but I did not have any dye so I ran it with normal battery water without dye.
On the back of the box you have the specifications and features of this product also.
Please click on thumbnails to get bigger pictures
Inside there is a bunch of accessories for this bay, you get yellow tubing around 1 meter and some tape for use on the fittings to get a leak free installation.
You also get 1/2 fittings that you can change to if you run that size of tubing in your system. The manual will explain the installation
procedure and of course four screws are included to mount this in the case :)
Please click on thumbnails to get bigger pictures
As said before this product takes two 5.25 slots so make sure you have enough or can remove something else to be able to fit this.
You have eight holes to choose from on each side when mounting the screws so this will fit any case.
RSS
