|
|
|
 |
|
 |
|
RBMODS REVIEWS |
Date 2004-10-17
Provider: Dangerden
Author: Niko Lupala
Editor: Amber Lupala
Dangerden Maze4 GPU-1 peltier block
We have looked at several waterblocks in our days but today we will add something more extreme to our testing.
We got a sample of Dangerdens Maze4 Gpu-1 waterblock which has a perltier included. Most of us know that if you connect a plet wrong
you burn it and if you mount it wrong you get condensation on your card which might ruin it so this will be interesting to see how/if
we get this to work :) We will see if we can get some nice overclocking stats on our Albatron FX5700.
About Dangerden:
Danger Den LLC.
41890 Old Highway 30
Astoria OR 97103
Phone: 503-458-6548
Specifications:
Block Height: 1.25" + Peltier Height + 0.300" Cold Plate
Use with up to 40mm x 40mm Peltier
Includes - 2 Stainless Steel Bolts, Spacers, Nuts, Springs,
Dielectric Grease, Neoprene, Support Plate, 80W Peltier,
MAZE4 GPU Cold Plate, Socket Wrech, and 4 mounting screws.
Can run with or without a peltier (Up to 40mm x 40mm)
 
Please click on thumbnails to see bigger pictures
The kit was well packed in foam in a bigger box and this is what we found in it. A bag with plet and mounting accessories and a box with the block itself.
The right picture shows the neoprene kit which prevents condensation from spreading on the card.
 
Please click on thumbnails to see bigger pictures
Here we can see the 80W peltier which was included in the kit. You can get the block in black or purple but DD sent me a purple one.
Color doesn't really matter as it's hidden anyways when the card is mounted.
 
Please click on thumbnails to see bigger pictures
The block overall is very high quality and these chrome fittings give it a nice look also. The coldplate seen on the right is pretty thick and you
mount the peltier between the coldplate and the GPU block.
Installation:
 
Please click on thumbnails to see bigger pictures
These instructions are just how I did the installation procedure. I read some instructions from the Dangerden site so it's up to you if you follow these.
Remove the coldplate from the block to prepare the peltier installation. Cut up the thin neoprene pad so it fits around the core.
More installation instructions >>>>> Page 2
Thank you Dangerden for making this review possible
|
| |
|
|
|
|
|
|
|
Copyright © 2002-2008 Rbmods.com. All Rights Reserved
Rbmods.com | Rbarcade.com | Rbconsoles.com
| BigMan“s Blog | flash templates | vista icons |
| Make Money Online |   
Our Friends - GideonTech | Metku | AllTheMods | OCModShop | Bona Fide Reviews | Rbmods | ThinkComputers | PCApex | TweakTown |
|
|
RSS
